$24.99

Water Filter Kit This water filter kit features a 10" carbon block filter that removes all chlorine and organic flavor. Kit includes 10" housing, one carbon block filter, garden hose attachment and 6' of 3/8" vinyl tubing. The carbon block should be replaced after filtering approximately 800 gallons of water or after 1 year of use, whichever comes first. Filter should be disassembled and stored dry when not in use.

For insulated 5 gallon beverage containers, like a Rubbermaid cooler, or any container with at least a 9" opening at the top - such as a bucket. Made from stainless steel with 3/32 perforated holes on 5/32 centers. The barb fitting is 3/8 inch.

For 10 gallon round beverage containers, like a Rubbermaid cooler. Made from stainless steel with 3/32 perforated holes on 5/32 centers. The barb fitting is 3/8 inch.

20qt Economy Kettle with lid

12-1/4" X 10-3/4"

$11.99

11lb Digital Scale

Weights in grams and ounces down to .1oz/1g. Uses 2 AA batteries.

A proprietary blend of food-grade phosphate buffers (similar to brewer's salts) that will lock in your mash and kettle water at a pH of 5.2 regardless of the pH of your water allowing for more consistent brewing. 1 TBS for 5 gal.

Top Tier Burner

The Top Tier Burner is a 72,000 BTU/hr burner that is a great blend of heating power and efficiency - and does so whisper quietly! In addition, low flame combustion is clean, wind performance is outstanding, and the heavy stainless construction is built to last a lifetime!

Blichmann documented that the published BTU of competitive burners varied wildly from actual measured results. And measuring the performance is straightforward: simply run the burner for an hour at full power and measure the weight of the propane used in lb. Then multiply the weight in lb X 21,000 to get the burner rating in BTU/hr. For example. the Bayou Classic has a published rating of 180 KBTU/hr but only measured at 68 KBTU/hr!

The TherminatorTM is the fastest way to chill your wort to yeast pitching temperature and get your fermentation off to a quick, bacteria-free start.

	All 316 stainless steel plates and fittings.
	Chill like the pro's - Identical to commercial brewery chillers.
	Brazed together with pure copper in an oxygen free furnace- no potential leaks like a gasketed unit!
	Chill 10 gal in 5 min to 68oF using 58oF cooling water at 5 gpm.
	Great for southern climates! (see notes on "Performance" page)
	Ultra compact (7.5" W, 4" D, 3" H)
	Super low restriction - ideal for gravity feed
	Easy to clean and sanitize - small enough to boil! *
	Garden hose thread connections on water side - no extra adapters to buy!
	1/2" male NPT fittings on wort side mates up with virtually all common hose connector types.  Easier to sanitize than female fittings!
	Saves water - lowest water consumption on the market!
	Comes with heavy gauge stainless mounting bracket